With the installation of the rear window on hold, possibly until next summer, I've moved on to other things that need doing and this seems like a good time to install the servos for the dual axis autopilot (Section 44BiS). I started by cutting the F-1291 Roll Servo Pushrod and the F-1292 Pitch Servo Pushrod from AT6-058X5/16 Tube (4 11/16" and 4 1/2"), then drilled and tapped both ends of each with a #3 drill bit and a 1/4-28 tap.
I then assembled the F-1291 Roll Servo Pushrod and hardware and F-1292 Pitch Servo Pushrod hardware.